Physics Crash Course for NEET - by Alakh sir
Still haunted by Physics? Don’t worry, you have our back. In this Playlist we have covered complete Physics to boost your NEET preparation level along with a session on Last time Revision Topics for…
- 4.2M likes on YouTube
- 210.7M views
Created by Physics Wallah - Alakh Pandey on YouTube
What you'll learn
- Mathematics • Trigonometric ratios and standard values
- Distance and displacement
- Kinematics • Motion from rest and free fall
- Relative velocity in 2D
- Projectile motion as two independent components
- Newton's first law and equilibrium
- Spring force and spring constant
- Friction: definition and direction
Explore related topics
Course content
01NEET Physics Crash Course || Basic Mathematics | Trignometry | Differentiation n Integration | UmeedPreview1:28:26
This chapter is a basic mathematics primer for NEET Physics, covering trigonometry, differentiation and integration. It starts with the standard values of sine, cosine and tangent for common angles (0°, 30°, 45°, 60°, 90°), the Pythagorean triples, and the conversion between degrees and radians (180° = π radians). It then explains the sign of trigonometric ratios in each quadrant using the ASTC idea, the reduction of angles such as 90° ± θ, 180° ± θ, 270° ± θ and 360° ± θ, and the standard identities sin²θ + cos²θ = 1 and its variants. The small-angle approximation (sin θ ≈ θ for small θ in radians) is introduced.
- Mathematics • Trigonometric ratios and standard values
- Mathematics • Trigonometric identities and quadrant signs
- Mathematics • Radian measure
- Mathematics • Differentiation basics
- Mathematics • Basic integration
- Mathematics • Maxima and minima
02KINEMATICS 01 || Motion in a Straight Line || 1-D Motion || NEET Physics Crash CoursePreview1:51:17
This chapter introduces one-dimensional motion (motion in a straight line) and begins with the difference between distance and displacement. Distance is the total path length travelled. Displacement is the shortest straight-line change in position from initial to final point. Displacement magnitude is never larger than distance. For a semicircle of radius r, distance is πr and displacement is 2r. For a full circle, displacement is zero.
- Distance and displacement
- Average speed and average velocity
- Instantaneous velocity and acceleration
- Equations of motion for uniform acceleration
- Graphs in one-dimensional motion
- Motion under gravity
03KINEMATICS 02 || Galileo's Law , Vectors , Relative Velocity in 1-D || NEET Physics Crash CoursePreview2:20:06
This chapter builds on one-dimensional kinematics and then introduces vectors. It starts with Galileo's law for a body falling from rest: the distances covered in successive equal time intervals are in the ratio 1:3:5:7, and distance grows as the square of time (s = ½gt²). Free-fall and motion-from-rest problems use these results together with v = u + at and s = ut + ½at².
- Kinematics • Motion from rest and free fall
- Kinematics • Galileo's law of odd numbers
- Vectors • Addition, resultant and subtraction
- Vectors • Dot and cross product
- Kinematics • Relative velocity in one dimension
- Kinematics • Displacement and average velocity
04KINEMATICS 03 | Relative Velocity 2- D | Rain Man n River Swimmer Problem| NEET Physics Crash CoursePreview1:00:38
Relative velocity in two dimensions means describing how one body appears to move from another body's point of view. The velocity of A with respect to B is found by vector subtraction, v_AB = v_A − v_B. Components are added along x and y axes, and the magnitude and direction come from Pythagoras and trigonometry. Two classic applications are the rain-and-man problem and the river-and-swimmer problem.
- Relative velocity in 2D
- Vector subtraction of velocities
- Rain and man problem
- River and swimmer problem
- Closest approach of two bodies
05KINEMATICS 04 || PROJECTILE MOTION in ONE SHOT || ALL Tricks & Concepts | NEET Physics Crash CoursePreview1:20:38
This chapter covers projectile motion, the two-dimensional motion of an object thrown near the ground under gravity alone. The key method is to split the motion into two independent parts: horizontal motion, which has constant velocity (u cos θ) because no horizontal force acts, and vertical motion, which behaves like free motion under gravity with initial velocity u sin θ and acceleration -g. The vertical velocity decreases on the way up, becomes zero at the maximum height, and then increases in the downward direction, so on landing the object has the same speed as at launch but the angle is mirrored.
- Projectile motion as two independent components
- Time of flight and maximum height
- Horizontal range and angle of projection
- Velocity of a projectile at time t
- Projectile launched from a height
- Trajectory equation and parabolic path
06LAWS OF MOTION 01 | First Law and Second Law in ONE SHOT | NEET Crash CoursePreview1:59:31
This chapter introduces Newton's first and second laws of motion. The first law (law of inertia) states that a body at rest stays at rest, and a body moving with uniform velocity keeps moving in a straight line, unless a net external force acts on it. So zero net force means zero acceleration, and states are classified as static (at rest) or dynamic (constant velocity), both being equilibrium. Force is a vector, and forces on a body are added vectorially; a body is in equilibrium when the vector sum of forces is zero.
- Newton's first law and equilibrium
- Newton's second law and momentum
- Impulse and average force
- Tension and connected bodies
- Normal reaction and action-reaction pairs
- Pulleys, inclined planes and collisions
07LAWS OF MOTION 02 || SPRING FORCE , PSEUDO FORCE , ROCKET PROPULSION || NEET Physics Crash CoursePreview1:58:51
This chapter covers three linked ideas from NEET Laws of Motion. First, spring force: a stretched or compressed ideal spring exerts a restoring force F = −kx, opposite to the displacement, where k depends on the spring's material and inversely on its length. In a massless spring the tension is the same at every point. Springs in series share the same force and have 1/k = 1/k₁ + 1/k₂, while springs in parallel share the same extension and have k = k₁ + k₂. A mass hanging at equilibrium stretches the spring until kx = mg. A spring balance reads the force applied at its ends, which is converted to kilograms by dividing by g.
- Spring force and spring constant
- Springs in series and parallel
- Pseudo force and apparent weight
- Newton's third law
- Conservation of linear momentum
- Rocket propulsion
08FRICTION IN ONE SHOT || All Concepts , Tricks , Mentoz Methods and PYQ || NEET Physics Crash CoursePreview2:51:18
Friction is a contact force that acts parallel to the surfaces in contact and always opposes the relative motion, or the tendency of relative motion, between them. Static friction acts when there is no relative sliding. It is self-adjusting: it matches the applied force up to a maximum value, called limiting friction, given by μₛN, where N is the normal reaction. Once the applied force exceeds this limit, the body starts to move. Kinetic friction acts during sliding and has a constant value, μₖN, that does not depend on speed or contact area. The coefficient of friction is dimensionless, and in general μₛ is greater than μₖ.
- Friction: definition and direction
- Static friction and limiting friction
- Kinetic friction
- Friction on an inclined plane
- Angle of friction and angle of repose
- Rolling versus sliding friction
09CIRCULAR MOTION 01 || Centriprtal Acceleration & Centripetal Force || NEET Physics Crash CoursePreview1:59:07
This chapter introduces circular motion in physics. It starts with angular displacement (θ), measured in radians, which is the angle swept by a particle moving on a circle. Angular displacement is dimensionless in the sense that its unit is radian, and one radian is about 57.3 degrees, while π radians equals 180 degrees. Angular velocity (ω) is the rate of change of angular displacement, with unit radian per second. The average angular velocity is total angular displacement divided by total time, and instantaneous angular velocity is the limit of this as the time interval shrinks. The chapter links ω to the period T (time for one revolution, ω = 2π/T) and frequency (number of revolutions per second, ω = 2πf). Note that frequency is not the same as angular velocity, and its unit is hertz or revolutions per second.
- Angular displacement and angular velocity
- Angular acceleration and kinematic equations
- Relation between linear and angular quantities
- Centripetal acceleration
- Centripetal force and centrifugal pseudo force
- Frequency, period and rpm conversion
10CIRCULAR MOTION 02 || Banking Of Road and Motion in a Vertical Circle || NEET Physics Crash CoursePreview2:12:44
This chapter covers circular motion in two parts: banking of roads and motion in a vertical circle. On a flat curved road, friction supplies the centripetal force, and the maximum safe speed is √(μrg). A car needs a centripetal force mv²/r toward the centre of the turn. Banking the road tilts the normal reaction inward, so its horizontal component helps provide that force. On a frictionless banked road, the ideal speed is v = √(rg tanθ), where the vertical component of the normal reaction balances weight and the horizontal component supplies the centripetal force. When friction is included, the safe speed range is bounded above and below, with the limits set by the friction coefficient μ and the banking angle θ.
- Banking of roads without friction
- Banking of roads with friction
- Maximum and minimum safe speed on curves
- Motion in a vertical circle: tension and speed
- Energy conservation in vertical circular motion
- Centripetal force and centrifugal effect
11Work Energy and Power 01|| Work ,Kinetic Energy, Work-Energy Theorem || NEET Physics Crash CoursePreview1:59:33
This chapter introduces work, kinetic energy and the work-energy theorem in physics. Work is defined as the dot product of force and displacement, W = F·s = Fs cosθ, making it a scalar quantity measured in joules (N·m) or erg (dyne·cm). Work is positive when force and displacement point in the same general direction, negative when they oppose each other, and zero when force is perpendicular to displacement, as in uniform circular motion. Work done by a variable force is found by integrating force over displacement, which equals the area under a force-displacement graph, with areas above the axis counted positive and areas below counted negative.
- Work and its sign
- Work by variable force and force-displacement graphs
- Conservative and non-conservative forces
- Kinetic energy and its relation to momentum
- Work-energy theorem
- Power
12Work Energy and Power 02 || Conservation of Mechanical Energy , Power|| NEET Physics Crash CoursePreview2:52:03
This chapter of the NEET Physics course covers conservation of mechanical energy and power. It starts with potential energy, which is defined through the change in potential energy: ΔU equals the negative of the work done by a conservative force as a body moves from its initial to its final position. Conservative forces, such as gravitational, electrostatic and spring forces, do work that depends only on the initial and final positions, not on the path taken. The work done by an external force equals the change in potential energy plus the change in kinetic energy, and the work-energy relation is applied under the conditions that no non-conservative force does work and no external force acts.
- Potential energy and conservative forces
- Gravitational potential energy and reference level
- Spring potential energy
- Work-energy theorem and change in potential energy
- Conservation of mechanical energy
- Power
13Centre Of Mass - 1 SHOT || All Concepts , Formulae , Tricks and PYQs || NEET Physics Crash CoursePreview2:34:36
This chapter introduces the centre of mass of a system of particles and a continuous body. The centre of mass is the point where the total mass of a system can be considered to be concentrated. For a system of particles, its position is found by taking the mass-weighted average of the particle positions: X_cm = (m₁x₁ + m₂x₂ + ...)/(m₁ + m₂ + ...). For two particles, the centre of mass lies on the line joining them, closer to the heavier mass, and its distance from each mass is inversely proportional to that mass.
- Centre of mass of particle systems
- Centre of mass of continuous bodies
- Centre of mass of bodies with a cut-out
- Motion of the centre of mass
- Conservation of momentum in explosions and collisions
14COLLISIONS in ONE SHOT || All Concepts , Formulae , PYQs || NEET Physics Crash CoursePreview2:02:43
This chapter covers collisions in physics, classified by whether kinetic energy is conserved: elastic (kinetic energy conserved), inelastic (kinetic energy decreases) and perfectly inelastic (bodies stick together and move with a common velocity). In every collision, momentum of the system is conserved, even though individual bodies' momenta change. The one-dimensional elastic collision formulas give v1 = ((m1 − m2)u1 + 2m2u2)/(m1 + m2) and v2 = ((m2 − m1)u2 + 2m1u1)/(m1 + m2), derived from momentum conservation and the relation that relative velocity of separation equals relative velocity of approach. Special cases include equal masses (velocities exchange), a light body hitting a heavy body at rest (light body rebounds with its speed reversed), and a heavy body hitting a light body at rest (heavy body keeps moving almost unchanged).
- Momentum conservation in collisions
- Elastic collisions in one dimension
- Perfectly inelastic collisions
- Coefficient of restitution
- Collisions in two dimensions
- Bouncing ball and repeated collisions
15Rotational Motion - 01 || Torque and Moment Of Inertia || NEET Physics Crash CoursePreview4:02:15
This chapter introduces rotational motion in a rigid body, where every particle moves in a circle around a fixed axis of rotation. All particles share the same angular velocity, but their linear velocities depend on their distance from the axis. The main tool is torque, the rotational effect of a force, given by τ = r × F, or magnitude r·F·sinθ. Only the component of force perpendicular to the position vector produces torque. Forces whose line of action passes through the axis, such as tension at a pivot or the weight of a pendulum bob when the string is vertical, produce zero torque. Net torque is found by taking clockwise and anticlockwise torques with opposite signs, usually taking anticlockwise as positive.
- Rotational motion basics and angular velocity
- Torque and its direction
- Equilibrium of rigid bodies
- Moment of inertia of particle systems
- Reduced mass and continuous mass distributions
- Friction and ladder equilibrium
16Rotational Motion - Part 2 | Next Class will be on @PW-NEETWallah || NEET Physics Crash CoursePreview8:20:23
Rotational motion extends the ideas of linear motion to objects that spin about an axis. Instead of displacement, velocity and acceleration, we use angular displacement (θ), angular velocity (ω) and angular acceleration (α), measured in radians and rad/s. For constant angular acceleration, the same kinematic equations as linear motion apply with these angular quantities, and linear speed of a point at distance r from the axis is v = rω. The rotational counterpart of mass is the moment of inertia (I), which measures how strongly a body resists changes in its rotation and depends on both the mass and how far that mass is spread from the axis. Torque (τ = r × F, or τ = Iα) is the turning effect of a force and produces angular acceleration, just as force produces linear acceleration.
- Angular displacement, velocity and acceleration
- Torque and angular acceleration
- Moment of inertia
- Angular momentum and its conservation
- Rotational kinetic energy and rolling motion
17GRAVITATION in ONE SHOT || ALL Concepts , Formulae, Shortcuts , PYQs|| NEET Physics Crash CoursePreview7:17:16
Gravitation describes the attractive force between any two masses. Newton's law of gravitation states that every particle attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centres, F = Gm₁m₂/r², where G is the universal gravitational constant. Forces from several masses add up vectorially (principle of superposition). A uniform spherical shell attracts an external point as if all its mass were at the centre, and inside the shell the field is zero. Inside a solid sphere the field grows linearly with distance from the centre, while outside it falls off as 1/r². The gravitational field is force per unit mass, and gravitational potential is work done per unit mass brought from infinity; potential energy of a system is negative because gravity is attractive.
- Newton's law of gravitation
- Gravitational field and potential
- Acceleration due to gravity
- Escape and orbital velocity
- Satellites and weightlessness
- Kepler's laws of planetary motion
18ELASTICITY IN ONE SHOT || MECHANICAL PROPERTIES OF SOLIDS || NEET PHYSICS CRASH COURSEPreview3:31:43
Elasticity is the property of a body to return to its original shape and size once the deforming force is removed. Deforming forces change a body's shape or size, and the body resists with an internal restoring force. Stress is the restoring force per unit area (SI unit N/m², also called the pascal). Strain is the fractional change in dimension and has no unit. Stress is of three kinds: longitudinal (tensile or compressive), shearing (tangential force), and volumetric (uniform pressure). Each kind has its own strain and its own elastic modulus: Young's modulus for longitudinal stress, shear modulus for shearing stress, and bulk modulus for volumetric stress. Within the elastic limit and the limit of proportionality, stress is directly proportional to strain (Hooke's law). Beyond the elastic limit the body does not fully recover. Materials such as steel are more elastic than rubber because they return to their original form faster and more completely.
- Elasticity and restoring force
- Stress and its units
- Strain and types of strain
- Types of elastic modulus
- Hooke's law and elastic limit
- Compressibility and volumetric stress
19FLUID MECHANICS IN ONE SHOT - All Concepts, Tricks & PYQs || NEET Physics Crash CoursePreview8:39:56
This NEET Physics chapter on Fluid Mechanics starts with pressure, defined as force per unit area, and density of fluids. It then covers how fluid pressure varies with depth (P = P₀ + ρgh), why pressure is the same at points on a horizontal level within one fluid, and how U-tube problems are solved by equating pressures at the same level. Pressure changes in accelerating fluids are examined, including the tilt of a liquid surface under horizontal acceleration, along with the barometer and Pascal's law, which states that pressure applied to an enclosed fluid is transmitted equally in all directions.
- Pressure and density
- Pressure variation in fluids
- Pascal's law and barometer
- Archimedes' principle and floatation
- Equation of continuity and Bernoulli's principle
- Viscosity, Stokes' law and terminal velocity
20SURFACE TENSION IN ONE SHOT - All Concepts, Tricks & PYQs || NEET Physics Crash CoursePreview3:56:45
Surface tension is a property of a liquid's surface. The surface behaves like a stretched elastic membrane and tends to contract to the smallest possible area. This happens because molecules in the surface layer have extra potential energy compared with molecules inside the liquid, since they are pulled inward by intermolecular attraction and have fewer neighbours. A system is most stable when its energy is low, so the liquid minimises its surface area. This explains why water drops are spherical, why a small needle or a light insect can float on water, and why soap films and liquid films have two surfaces that together pull on a wire frame.
- Surface tension definition and nature
- Surface energy and minimum surface area
- Surface tension as force per unit length
- Excess pressure in drops and soap bubbles
- Work done and surface energy change in films
- Effect of temperature and impurities on surface tension
21THERMAL PROPERTIES OF MATTER IN ONE SHOT (Part 1) - All Concepts & PYQs || NEET Physics Crash CoursePreview5:25:26
This chapter introduces thermal properties of matter. It begins with temperature scales: Celsius, Kelvin and Fahrenheit. The freezing point of water is 0°C, 273 K and 32°F, and the boiling point is 100°C, 373 K and 212°F. Conversions use the linear relation (T − lower fixed point)/(upper − lower) being equal for any two scales. Key relations are K = °C + 273, °C/100 = (°F − 32)/180, and absolute zero equals −273°C or −460°F. The chapter also covers temperature-change relations (ΔC/5 = ΔF/9) and problems with imaginary scales that have their own fixed points.
- Temperature scales and conversion
- Linear expansion
- Area and volume expansion
- Thermal stress and bimetallic strips
- Pendulum clock and time error
- Anomalous expansion of water
22HEAT TRANSFER IN ONE SHOT - Thermal Properties Of Matter - PART 2|| NEET Physics Crash CoursePreview5:34:41
This chapter, part 2 of the thermal properties of matter series for NEET physics, focuses on heat transfer, the process by which thermal energy moves from a hotter body to a cooler one. Heat can travel by three main mechanisms: conduction, where energy passes through a material by particle-to-particle collisions without bulk movement of the material; convection, where heat is carried by the bulk movement of a fluid due to density differences; and radiation, where energy is transferred as electromagnetic waves and needs no medium at all. Each mechanism is governed by its own relationships, such as Fourier's law of conduction, which links the heat flow rate to the material's thermal conductivity, cross-sectional area, and temperature gradient.
- Conduction and Fourier's law
- Convection
- Thermal resistance in series and parallel
- Radiation and black body
- Stefan's law and Wien's displacement law
- Newton's law of cooling
23THERMODYNAMICS IN ONE SHOT || All Theory, Tricks & PYQs Covered |NEET Physics Crash CoursePreview7:50:16
This chapter covers the core ideas of thermodynamics for NEET Physics. It begins with thermal equilibrium: a system is in thermal equilibrium when all its macroscopic properties (pressure, volume, temperature, mass, number of moles) stay constant over time. Two bodies are in thermal equilibrium when they are in contact through a diathermic wall and have the same temperature. The zeroth law states that if body A is in thermal equilibrium with C, and B is also in equilibrium with C, then A and B are in equilibrium with each other. An isolated system with an insulated boundary exchanges no heat, so its process is adiabatic.
- Thermal equilibrium and zeroth law
- Internal energy of an ideal gas
- Degrees of freedom and equipartition
- Molar specific heats Cv and Cp
- Ratio of specific heats γ
24KINETIC THEORY OF GASES In One Shot || NEET Physics Crash CoursePreview3:16:30
This chapter introduces the kinetic theory of gases, built around the ideal gas model. An ideal gas is one whose molecules are identical, move randomly in straight lines, collide elastically with each other and with container walls, have negligible volume compared with the container, and have no intermolecular forces of attraction. Real gases deviate from this, especially at high pressure and low temperature.
- Ideal gas model and assumptions
- Gas laws: Boyle, Charles, Gay-Lussac
- Ideal gas equation and units
- Pressure from kinetic theory
- Kinetic energy and degrees of freedom
- RMS speed and molar mass
25SHM IN ONE SHOT || Simple Harmonic Motion || NEET Physics Crash CoursePreview7:16:56
Simple harmonic motion (SHM) is a special kind of periodic motion. A motion is periodic when it repeats itself after equal intervals of time, for example a planet orbiting, the Earth rotating, or a pendulum swinging. SHM is the simplest oscillatory motion. Its defining feature is that the restoring force is directly proportional to the displacement from the mean (equilibrium) position and always points toward that mean position: F = −kx. The minus sign shows that the force opposes the displacement.
- Periodic motion and oscillations
- Restoring force and SHM definition
- SHM kinematics (displacement, velocity, acceleration)
- Time period, frequency and angular frequency
- Energy in SHM
- Spring-mass system and simple pendulum
26WAVES IN ONE SHOT - PART 1 || All Concepts , Shortcuts and PYQs || NEET Physics Crash CoursePreview5:20:51
This chapter introduces waves in physics. A wave is a disturbance that travels through a medium, carrying energy and momentum, while the particles of the medium only oscillate about their mean positions. Waves are classified as mechanical (need a medium, such as sound and waves on a string) or non-mechanical (such as electromagnetic waves, which need no medium). They are also classified as transverse (particles move perpendicular to the direction of propagation, as on a string or in light) or longitudinal (particles move parallel to propagation, as in sound in air).
- Wave basics and types
- Wave equation
- Harmonic progressive wave
- Wave velocity and particle velocity
- Phase and path difference
- Speed of waves on a string and intensity
27SOUND WAVES IN ONE SHOT || Waves - Part 2 || All Concepts and PYQs || NEET Physics Crash CoursePreview4:04:36
This chapter, Sound Waves (Part 2), covers how sound travels through a medium and how standing waves form in pipes. Sound in air is a longitudinal wave: particles oscillate parallel to the direction of travel, creating alternating regions of compression (high pressure and density) and rarefaction (low pressure and density). Displacement and pressure variations are 90 degrees out of phase: where displacement is maximum (antinode), pressure change is minimum (node), and vice versa. Pressure amplitude relates to the intensity of the wave, and intensity is proportional to the square of frequency and the square of amplitude.
- Longitudinal waves and pressure variation
- Speed of sound in media
- Organ pipes and harmonics
- Resonance
- Beats and interference
- Intensity of sound waves
28ELECTRIC CHARGES AND FIELDS in One Shot - All Concepts & PYQs || NEET Physics Crash CoursePreview7:34:35
This chapter introduces electric charge and the basic laws that govern how charges interact. Charge is an intrinsic property of matter, like mass, and it comes in two types: positive and negative. Like charges repel and unlike charges attract. The SI unit is the coulomb (C). In an isolated system, the total charge stays constant (conservation of charge). Charge is quantized: every charge is an integer multiple of the elementary charge e = 1.6 × 10⁻¹⁹ C, carried by an electron or proton. Charging happens by friction, conduction and induction. In conduction, identical spheres that touch share their total charge equally, and in induction a nearby charge polarizes a neutral conductor without changing its net charge.
- Electric charge and its properties
- Quantization and conservation of charge
- Charging by conduction, induction and friction
- Coulomb's law and superposition
- Equilibrium of charges
- Electric field and field of charge distributions
29ELECTRIC POTENTIAL & POTENTIAL ENERGY in One Shot - All Concepts & PYQs | NEET Physics Crash CoursePreview3:47:50
This chapter introduces electric potential and potential energy. Potential difference between two points is the work done by an external agent in moving a unit positive charge slowly from one point to the other, so V_B − V_A = W/q, with SI unit volt (joule per coulomb). Electrostatic force is conservative, so the work depends only on the initial and final positions, not on the path. Electric potential at a point is defined with the reference of zero potential at infinity, giving V = kq/r for a point charge, with the sign of q kept. For a system of charges, potentials add as scalars. Dipole potential is V = kp cosθ/r² (on the axial and equatorial lines, V is kp/r² and 0 respectively). The relation between field and potential is that the field points in the direction in which potential decreases, E = −dV/dr, and the work for a small displacement is −E·Δr.
- Potential difference and potential
- Potential due to point charges and systems
- Electric dipole potential
- Relation between field and potential
- Equipotential surfaces and conductors
- Potential of rings, shells and spheres
30CAPACITORS in One Shot - All Concepts & PYQs | NEET Physics Crash CoursePreview4:50:39
A capacitor stores electric charge and energy. Its capacitance C is the charge stored per unit potential difference, C = Q/V, and is measured in farads (1 F = 1 C/V). Capacitance depends only on geometry and the material between the plates, not on the charge or voltage. An isolated conducting sphere of radius R has C = 4πε₀R. Charge on a conductor sits on its surface, and the field inside a conductor in electrostatic equilibrium is zero. The energy stored is U = ½CV² = Q²/2C = ½QV.
- Capacitance and farad units
- Parallel plate capacitor
- Energy stored in capacitors
- Series and parallel combinations
- Charge sharing and dielectrics
- Spherical and concentric capacitors
31CURRENT ELECTRICITY in One Shot PART 1 - All Concepts, PYQs | NEET Physics Crash CoursePreview6:26:10
This chapter introduces current electricity. Electric current is the rate of flow of charge, with average current I = Δq/Δt and instantaneous current I = dq/dt; for a time-varying current the charge over an interval is the area under the I-t graph. Current is taken as flowing in the direction of positive charge flow, so electrons move opposite to the conventional current. For a charge q moving in a circle with frequency f, the equivalent current is I = q·f.
- Electric current and drift velocity
- Ohm's law and resistance
- Resistivity and factors affecting it
- Temperature dependence of resistance
- Current density and vector form of Ohm's law
- Resistor colour code
32CURRENT ELECTRICITY in One Shot - PART 2 - All Concepts, PYQs | NEET Physics Crash CoursePreview5:39:10
This chapter covers the second part of Current Electricity. It starts with Kirchhoff's two laws: the junction (current) law, based on conservation of charge, says the total current entering a junction equals the total leaving it; the loop (voltage) law, based on conservation of energy, says the algebraic sum of potential changes around any closed loop is zero. Sign rules are explained for resistors (potential drop when current and chosen path point the same way) and for cells (a drop when moving from positive to negative terminal, a gain when moving from negative to positive). Kirchhoff's laws are then applied to solve circuits with one or more loops, and simpler methods such as series and parallel combinations of cells and resistors are shown as shortcuts.
- Kirchhoff's current law (junction rule)
- Kirchhoff's voltage law (loop rule)
- Potential difference across resistors and cells
- Electrical power and energy
- Joule's heating and fuse wire
- Power rating and maximum power transfer
33MOVING CHARGES AND MAGNETISM in One Shot || All Concepts, PYQs | NEET Physics Crash CoursePreview8:00:12
This chapter on moving charges and magnetism starts with Oersted's discovery that a current-carrying wire produces a magnetic field around it, with the direction found by the right-hand thumb rule. It then introduces the Biot-Savart law: the field dB from a small current element Idl at distance r is (μ₀/4π)·I·dl×r/r³, so the magnitude is (μ₀/4π)·I·dl·sinθ/r². The law is applied to a finite straight wire, giving B = (μ₀/4π)(I/a)(sinθ₁ + sinθ₂), where a is the perpendicular distance from the point to the wire. For an infinitely long wire B = μ₀I/(2πa), and on the axis of a current element the field is zero. The chapter also covers the centre of a circular loop or arc (B = μ₀I/2R for a loop, and μ₀nI/2R for n turns), the semicircle and quarter-circle cases, and the field of two parallel or perpendicular wires, where the fields add vectorially and can cancel. Finally, it introduces Ampère's circuital law as an alternative method for symmetric situations, and the rotating charged ring, where the equivalent current is q·f.
- Oersted's experiment and magnetic field of a current
- Biot-Savart law and its applications
- Magnetic field of straight and infinite wires
- Magnetic field at the centre of circular loops and arcs
- Ampère's circuital law
- Magnetic field from rotating charges and parallel wires
34MAGNETISM AND MATTER in One Shot - All Concepts & PYQs | NEET Physics Crash CoursePreview4:01:36
This chapter, Magnetism and Matter, starts with bar magnets as magnetic dipoles: two poles of equal and opposite strength separated by a distance, with magnetic dipole moment M = m × 2l directed from south pole to north pole inside the magnet. The magnetic dipole is compared with an electric dipole, and the field of a dipole is discussed on the axial and equatorial lines, along with the torque and potential energy of a dipole placed in a uniform magnetic field. Stable equilibrium occurs when the dipole aligns with the field, and the work needed to rotate it is stored as potential energy.
- Magnetic dipole and bar magnet
- Magnetic field lines and their properties
- Earth's magnetism and its elements
- Tangent galvanometer
- Vibration magnetometer and oscillation period
35ELECTROMAGNETIC INDUCTION - EMI in One Shot - All Concepts & PYQs | NEET Physics Crash CoursePreview5:12:06
This chapter covers electromagnetic induction (EMI) in physics. It starts with magnetic flux, defined as Φ = B·A = BA cosθ, where θ is the angle between the magnetic field and the area vector (not the plane). For a non-uniform field, flux is found by integrating B·dA. For a coil of N turns, total flux is NBA cosθ. The SI unit of flux is the weber (Wb), and magnetic field is in tesla (T).
- Magnetic flux
- Faraday's law of induction
- Lenz's law
- Induced charge and current
- EMF in rotating coils and AC generator
- Motional EMF
36ALTERNATING CURRENT - AC in One Shot - All Concepts & PYQs | NEET Physics Crash CoursePreview5:29:11
This chapter introduces alternating current (AC), an electric current whose magnitude and direction change periodically, unlike direct current (DC), which flows one way at a steady level. AC is produced by an AC generator, where a coil rotating in a magnetic field induces a sinusoidal emf. Because the average value of AC over a full cycle is zero, the RMS (root mean square) value is used to describe AC quantities: RMS current equals peak current divided by √2, and it gives the same heating effect as an equivalent DC current. Phasor diagrams represent sinusoidal voltages and currents as rotating vectors, which makes phase relationships easy to see.
- AC Generator and Average/RMS Values
- Phasors and AC Circuit Elements
- Inductive and Capacitive Reactance
- Series LCR Circuit and Resonance
- Power Factor and Choke Coil
- LC Oscillations and Transformers
37ELECTROMAGNETIC WAVE - EMW in One Shot - All Concepts & PYQs | NEET Physics Crash CoursePreview3:09:55
Electromagnetic waves are produced when electric and magnetic fields change in time and regenerate each other. Maxwell's key insight was the displacement current, ε₀(dΦE/dt), which is added to conduction current in Ampère's law. A changing electric field produces a magnetic field, and a changing magnetic field produces an electric field (Faraday's law). Together these explain why a self-sustaining wave can travel through empty space.
- Displacement current and Maxwell's equations
- Electromagnetic wave propagation and speed
- Energy density and intensity of EM waves
- Momentum and radiation pressure
- Electromagnetic spectrum
- Polarization and transverse nature
38RAY OPTICS IN ONE SHOT - PART 1 || All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview4:14:27
This chapter opens the ray optics (geometrical optics) part of physics. It defines a ray as a straight-line path of light in a homogeneous medium, and a beam as a bundle of rays, classified as parallel, convergent, or divergent. It then covers reflection: regular (specular) reflection from smooth surfaces versus diffuse reflection from rough ones. Key terms are introduced: normal, angle of incidence, angle of reflection, and grazing angle. The two laws of reflection are stated: the incident ray, reflected ray and normal lie in one plane, and the angle of incidence equals the angle of reflection. These hold for plane and curved surfaces alike.
- Ray and beam of light
- Reflection of light and laws of reflection
- Plane mirror images and field of view
- Rotation of mirrors and reflections between inclined mirrors
- Spherical mirrors: focal length and sign convention
- Mirror formula and magnification
39RAY OPTICS IN ONE SHOT - PART 2 || All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview5:51:34
This chapter (Ray Optics, Part 2) covers spherical refraction at a single curved surface and lenses. It introduces the pole, centre of curvature, radius of curvature and principal axis of a spherical refracting surface, and the sign convention: distances are measured from the pole, with the direction of incident light taken as positive, so real objects and real images on the far side are treated with their signs. The key relation for a single spherical surface is n₂/v − n₁/u = (n₂ − n₁)/R, which is used to find image position, and the lateral magnification m = (height of image)/(height of object) = (n₁v)/(n₂u) follows from it. Magnification greater than one means an enlarged image, a positive value means an erect image, and a negative value means an inverted image. Real and virtual images are distinguished by whether light actually converges at the image point.
- Refraction at a spherical surface
- Sign convention and magnification
- Real and virtual images
- Lens maker's formula
- Lens formula and magnification
- Power of lens and cut or immersed lenses
40WAVE OPTICS IN ONE SHOT || All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview3:32:36
Wave optics studies light as an electromagnetic wave, using the wavefront picture and Huygens' principle to explain reflection, refraction and interference. A wavefront is the locus of points vibrating in phase; each point on it acts as a secondary source, and the envelope of the secondary wavelets gives the new wavefront. Rays are perpendicular to wavefronts, and a point source gives spherical wavefronts while a distant source gives plane ones. Refraction is explained by the relation between wavelength, path difference and the refractive index, since the wavelength in a medium is λ/μ.
- Wavefronts and Huygens' principle
- Coherent sources and interference
- Young's double slit experiment
- Diffraction at a single slit
- Polarisation of light
- Doppler effect for light
41DUAL NATURE OF RADIATION & MATTER || All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview4:02:01
This chapter covers the dual nature of radiation and matter. It traces the history of the light debate: Newton proposed that light is a particle, Huygens proposed a wave, and Planck's work on black-body radiation later showed that light energy is quantized into photons. Each photon carries energy E = hf = hc/λ, and light is a collection of photons. Photons have zero rest mass and zero charge, travel at c in vacuum, and have momentum p = h/λ. Light intensity is the energy per unit area per unit time and, for a fixed source, is proportional to the number of photons, while the frequency alone sets the energy of each photon. The power of a light beam is the total energy per second, so the number of photons per second equals P/hf.
- Photons and energy quantization
- Photoelectric effect
- Stopping potential and photocurrent
- Photon momentum and mass
- Intensity and power of radiation
- De Broglie matter waves
42ATOMS AND NUCLEI || All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview4:51:01
This chapter on Atoms and Nuclei covers the basic structure of the nucleus and how nuclear properties are measured. The nucleus is described by its atomic number Z (protons), mass number A (protons plus neutrons), and neutron number N = A − Z. Protons and neutrons are treated as nucleons, and nuclear size is given by R = R₀A^(1/3), so nuclear volume is proportional to mass number and density is nearly constant across nuclei. Mass is measured in atomic mass units (u), with 1 u ≈ 931.5 MeV/c². The nuclear force is a short-range, strong, charge-independent attractive force that holds nucleons together against electrostatic repulsion between protons, acting only inside the nucleus.
- Nuclear size and density
- Mass defect and binding energy
- Binding energy per nucleon
- Nuclear force
- Radioactive decay and half-life
- Alpha, beta and gamma decay
43SEMICONDUCTORS in One Shot : All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview7:17:41
This chapter introduces Boolean algebra and digital logic, then moves to semiconductor physics. Boolean variables take only 0 or 1. Key identities are 1 + 1 = 1, 1 · 1 = 1, A + A = A, A · A = A, and double inversion (taking NOT twice returns the original value). The basic gates are NOT, AND and OR, and NAND and NOR are universal because any gate can be built from either one. Gates are built from transistors and are often explained with switches: series switches act as AND, parallel switches act as OR, and a NOT gate inverts its input.
- Mathematics • Boolean algebra
- Logic gates
- Energy bands in solids
- Intrinsic semiconductors and electron-hole pairs
- Doping and n-type semiconductors
- Temperature dependence of conductivity
44LAST TIME REVISION TOPICS FOR PHYSICS | NEET 2021Preview1:25:55
This revision lecture for NEET 2021 Physics explains which topics of each Physics chapter are most likely to appear in the exam, based on question patterns from past years. It covers modern physics (photoelectric effect, de Broglie wavelength, energy units such as the electronvolt, atomic transitions, nuclear binding energy and radioactive half-life), rotational motion (rolling on an inclined plane, the parallel and perpendicular axis theorems, angular momentum conservation, torque), and semiconductors (depletion width, p-type and n-type doping, diode and LED characteristics, transistor gain relations, logic gates).
- Modern Physics • Photoelectric effect and de Broglie wavelength
- Rotational motion and rolling on an inclined plane
- Semiconductors and diodes
- Current electricity and Wheatstone/meter bridge
- Thermodynamics processes
- Waves, Doppler effect and standing waves
45UNITS AND DIMENSIONS in One Shot : All Concepts, Tricks and PYQs || NEET Physics Crash CoursePreview3:34:53
This chapter introduces units and dimensions for NEET Physics. A physical quantity is anything measurable, expressed as a numerical value times a unit. Measurement means comparing a quantity with a standard reference, and the standard reference is called a unit. Changing the unit changes the numerical value inversely but never the physical quantity itself, so the numerical value and unit are inversely proportional.
- Physical quantities and units
- Fundamental and derived quantities
- Dimensions and dimensional formulae
- Principle of homogeneity and unit conversion
- Dimensionless quantities
- Errors in measurement
46NEET 2021 Paper Discussion || Physics Wallah || NEET 2021 Answer KeyPreview7:12:15
This chapter is a NEET 2021 paper discussion covering Biology, with a short Chemistry section at the end. The Biology part reviews PCR (denaturation near 94°C, primer annealing, then extension) and the central dogma, where DNA is copied to RNA and RNA is translated to protein. It also covers genetics ideas such as autosomal recessive inheritance (sickle cell anaemia gives a 25% chance of an affected child when both parents are carriers), founder effect as a type of genetic drift, and DNA fingerprinting based on variable repetitive sequences. Physiology points include the oxygen dissociation curve (a left shift favours oxyhaemoglobin formation), insulin processing (C-peptide is absent from mature insulin), and muscle types (smooth muscle lacks intercalated discs, which are found in cardiac muscle).
- Biology • Molecular biology and PCR
- Biology • Genetics and evolution
- Biology • Human physiology
- Biology • Ecology
- Biology • Biotechnology
- Chemistry • Solid state, p-block and physical chemistry
Description
Still haunted by Physics? Don’t worry, you have our back. In this Playlist we have covered complete Physics to boost your NEET preparation level along with a session on Last time Revision Topics for Physics and do you know what is the most amazing thing in this playlist – All the chapters are taught by Alakh sir himself. These are the chapters which we have covered in this playlist – • Basic Mathematics • Motion in a Straight Line • Vectors • Projectile Motion • Relative Velocity • Laws of Motion • Friction • Circular Motion • Work, Power and Energy • Centre of Mass • Collision • Rotational Motion • Gravitation • Elasticity • Fluid Mechanics • Surface Tension • Thermal Properties of Matter • Heat Transfer • Thermodynamics • Kinetic Theory of Gas • SHM • Waves • Electric Charges and Fields • Electric Potential and Potential Energy • Capacitors • Current Electricity • Moving Charges and Magnetism • Magnetism and Matter • Electromagnetic Induction • Alternating Current • Electromagnetic Wave • Ray Optics • Wave Optics • Dual Nature of Radiation and Matter • Atoms and Nuclei • Semiconductors • Units and Dimensions
About the creator
- YouTube channel
- 14.4M subscribers
- 2 courses on Studyio
The videos in this course are made by Physics Wallah - Alakh Pandey and play from YouTube, credited to them. Studyio adds the chapters, notes, quizzes and a certificate around them.
More from Physics Wallah - Alakh Pandey
More courses like this

Optimal Protocols for Studying & Learning

Business Studies Class 12

Manzil 2026: Complete CHEMISTRY Playlist

Trigonometry ONE SHOT 🔥 | Class 10 Maths Chapter 8 | Ritik Mishra

UNIT AND DIMENSION Unit and Dimensions FULL CHAPTER | Class 11th Chapter 1 | Arjuna JEE

