Mechanical Properties of Fluids Class11 🔥 | NCERT + PYQs + Derivations | Physics Chapter 9
Mechanical Properties of Fluids Class11 🔥 | NCERT + PYQs + Derivations | Physics Chapter 9 by Akshay Tyagi Sir
- 12.2K likes on YouTube
- 945.5K views
Created by PW Class 11 Science on YouTube
What you'll learn
- Fluids and their properties
- Specific gravity and relative density
- Pressure due to a liquid column
- Atmospheric pressure
- Buoyant force (upthrust)
- Streamline and turbulent flow
- Energy of a flowing fluid
- Torricelli's law and efflux speed
Explore related topics
Course content
01Introduction to Fluids and DensityPreview15:23
This chapter introduces fluids and their mechanical properties. A fluid is any substance that can flow, which includes liquids like water and oil, and gases like air. Fluids take the shape of the container they are put in, and they cannot resist shear (tangential) stress, so they flow under it. Because fluids have no fixed shape, they have no modulus of rigidity.
- Fluids and their properties
- Thrust and pressure
- Density
- Ideal and incompressible fluids
- Static fluids and fluid dynamics overview
02Specific Gravity and Relative DensityPreview15:20
This chapter introduces specific gravity (also called relative density), which compares a substance's density with the density of water. Water is the reference because its density is about 1000 kg/m³ (1 g/cm³) at 4°C. A substance denser than water sinks, and one less dense floats. The lesson also covers water's unusual behaviour: it is densest at 4°C, and ice is less dense than liquid water, which is why ice floats. Convection currents explain why warm water rises and cold water sinks in a heated pot or pool.
- Specific gravity and relative density
- Density of water and its anomalous behaviour
- Pascal's law
- Hydraulic brakes and hydraulic lifts
- Pressure in a liquid column
03Pressure Exerted by Liquid ColumnPreview16:45
This chapter explains the pressure exerted by a liquid column. The force a liquid puts on the base of a vessel equals its weight, mg. Dividing this force by the area gives pressure, and writing mass as density times volume (area times height) gives the formula P = ρgh. Here ρ is the liquid's density, g is the acceleration due to gravity, and h is the depth below the surface.
- Pressure due to a liquid column
- Formula P = ρgh
- Pressure depends only on depth
- Atmospheric pressure and total pressure
- Units of pressure (Pa, atm, bar, cm of Hg)
- Height of the atmosphere
04Atmospheric Pressure and BarometerPreview15:26
This chapter explains atmospheric pressure using a simple experiment. When a test tube full of water is inverted into a container of water, the water level in the tube does not simply equalize. A vacuum forms at the top of the tube because the water pulls down and leaves empty space. Points at the same height in a connected liquid have equal pressure, and if they did not, the fluid would flow from high pressure to low pressure. Using this idea, the water column height is supported by atmospheric pressure. Using water, the column would need to be about 10 m tall, which is impractical. So mercury is used instead, because it is about 13,600 kg/m³ dense. Mercury gives a column height of about 0.76 m (76 cm of Hg), which equals one atmosphere of pressure. Mercury is preferred because it is very dense, does not evaporate easily (so no vapour pressure disturbs the vacuum), and is opaque and shiny, so the level is easy to read.
- Atmospheric pressure
- Barometer and mercury column
- Pressure in fluids
- Manometer
- Buoyant force
05Archimedes' Principle and BuoyancyPreview15:06
This chapter introduces buoyancy, the upward force a fluid exerts on an object placed in it. The fluid pushes on all faces of the object, and because pressure increases with depth, the net push is upward. This upward force is called upthrust, buoyant force, or the net force by liquid. It acts through the centre of buoyancy, which is the centre of the displaced fluid.
- Buoyant force (upthrust)
- Archimedes' principle
- Apparent weight in fluids
- Law of flotation and density criteria
- Pressure in fluids and depth
- Barometer with different liquids
06Fluid Flow and Equation of ContinuityPreview15:52
This chapter introduces the idea of fluid flow, starting with the difference between streamline (steady) flow and turbulent flow. In streamline flow, every fluid particle passing a given point moves along the same path and with the same velocity as the particles that passed that point before it. Streamlines never cross, and the tangent at any point gives the direction of velocity. In turbulent flow, the path and velocity keep changing irregularly, which happens once the velocity goes above a critical value.
- Streamline and turbulent flow
- Ideal fluid properties
- Equation of continuity
- Continuity derivation from conservation of mass
- Energy in steady fluid flow
07Energy of Fluid and Bernoulli’s TheoremPreview18:40
This chapter explains the energy of a flowing fluid and derives Bernoulli's theorem. The lecturer first describes three kinds of energy a fluid can have: kinetic energy (1/2 mv²), potential energy (mgh), and pressure energy, which comes from the pressure pushing the fluid. Energy is then expressed per unit volume (density-based form) and per unit weight (head form). Kinetic energy per unit weight is v²/2g, called velocity head. Potential energy per unit weight is h, called potential head. Pressure per unit weight is p/ρg, called pressure head.
- Energy of a flowing fluid
- Velocity head, pressure head and potential head
- Equation of continuity (a1v1 = a2v2)
- Derivation of Bernoulli's theorem
- Work done by pressure and gravity in fluid flow
- Bernoulli's equation p + ρgh + ½ρv² = constant
08Torricelli’s Law and Dynamic LiftPreview25:07
This chapter covers fluid dynamics in three linked parts. First, Torricelli's law: when a hole is made in a tank of water at depth h, the water leaves at speed √(2gh), the same speed a body reaches after falling freely through height h. The derivation uses Bernoulli's equation, P + ρgh + ½ρv² = constant, applied between the free surface and the hole. Both the top and the outlet are at atmospheric pressure, and the surface velocity v1 is negligible, so the equation reduces to v2 = √(2gh).
- Torricelli's law and efflux speed
- Bernoulli's equation and pressure in moving fluids
- Dynamic lift and the Magnus effect
- Viscosity and viscous force
- Stokes' law and terminal velocity
- Reynolds number and flow types
09Surface Tension and Surface EnergyPreview15:27
This chapter introduces surface tension and surface energy, starting from the forces between molecules. Cohesive forces act between molecules of the same substance, which is why water sticks to itself and forms drops. Adhesive forces act between molecules of different substances, such as ink sticking to paper or water sticking to a container. Surface tension is defined as the force acting perpendicular to a unit length of a liquid surface, S = F/L. Because molecules at the surface are pulled inward by their neighbours, the liquid surface behaves like a stretched elastic membrane and tends to shrink to the smallest area. This is why drops and bubbles take a spherical shape, which has the least surface area for a given volume.
- Cohesive and adhesive forces
- Surface tension
- Surface energy
- Work done in soap bubbles and drops
- Excess pressure in a liquid drop
10Excess Pressure and CapillarityPreview08:47
This chapter covers surface tension and its effects on liquids. It starts with excess pressure inside a liquid drop, derived from the energy change when the surface area changes. For a single drop (or liquid film with one surface) the excess pressure is 2S/R, where S is the surface tension and R the radius. A soap bubble has two surfaces, so its excess pressure is 4S/R.
- Excess pressure
- Angle of contact
- Capillarity
- Factors affecting surface tension
Description
Lecture by Akshay Tyagi Sir Mechanical Properties of Fluids Class11 🔥 | NCERT + PYQs + Derivations | Physics Chapter 9 by Akshay Tyagi Sir Notes link : https://physicswallah.onelink.me/ZAZB/8boquipb Uday Fastrack 2026 : https://physicswallah.onelink.me/ZAZB/liniwn9n Physics Playlist : https://www.youtube.com/@pwudayclass11th/playlists In this session, Akshay Tyagi Sir will cover the complete Mechanical Properties of Fluids (Chapter 9) from Class 11 Physics — including NCERT concepts, important PYQs, and key derivations. This session is perfect for Boards, CUET, JEE, and NEET 2026 aspirants who want conceptual clarity and full-scoring notes. 📘 What’s Covered: ✅ Complete NCERT Theory ✅ All Important PYQs ✅ Key Derivations & Formula Summary ✅ Tricks to Solve Numerical Questions 🎯 Perfect for: Class 11 Students | Board Exam 2026 | CUET | JEE | NEET Aspirants #MechanicalPropertiesOfFluids #Class11Physics #AkshayTyagiSir #CUET2026 #JEE2026 #NEET2026 #BoardExam2026 #PhysicsChapter9 #ParishramGOATBatch #PhysicsOneShot #NCERTPhysics #PYQs #PhysicsDerivations
About the creator
- YouTube channel
- 1.3M subscribers
- 2 courses on Studyio
The videos in this course are made by PW Class 11 Science and play from YouTube, credited to them. Studyio adds the chapters, notes, quizzes and a certificate around them.
More from PW Class 11 Science
More courses like this

Optimal Protocols for Studying & Learning

Business Studies Class 12

Manzil 2026: Complete CHEMISTRY Playlist

Trigonometry ONE SHOT 🔥 | Class 10 Maths Chapter 8 | Ritik Mishra

UNIT AND DIMENSION Unit and Dimensions FULL CHAPTER | Class 11th Chapter 1 | Arjuna JEE

